O3EX HENF315845R2传感器的灵敏度为200mV/cm/S，则它的输出电压(标准值)即为200mV。  传感器的灵敏度为280mV/cm/S，则它的输出电压(标准值)即为280mV。
 当被校准的传感器为水平传感器时，校准仪应水平放置。 当被校准的传感器为垂直传感器时，校准仪应垂直放置。TD-2-50TD-2型热膨胀传感器
TD-2型热膨胀传感器主要用于测量汽轮机汽缸膨胀位移量，与热膨胀监控仪相配合即可完成热膨胀位移量的远传指示、报警、恒流输出等功能。就地指示视野大，远传指示为数字显示，清晰直观。采用中频差动变压器式位移传感器作为传感元件，是一种高可靠的 LVDT 位移传感器，抗力强，线性好，结构简单，不易损坏，能连续使用。 

振动速度传感器是利用磁电感应原理把振动信号转换成电信号。它主要由磁路系统、线圈组件、弹簧阻尼等部分组成。在传感器壳体中刚性地固定有两个线圈组件，磁钢用弹簧悬挂于壳体。当传感器在工作频率范围内工作时，线圈与磁钢产生相对运动，线圈切割磁力线，产生感应电动势（感应电压），该电压正比于机壳的振动速度。温度传感器的温度测量是利用铂电阻随温度线性变化的性质来测温的。


技术指标：
1. 量程： 0～50mm （量程由用户自定） 
2. 准确度：± 1% （满量程） 
3. 环境温度： -20 ℃ ～+100 ℃ 
4. 相对湿度：≤ 80% 

技术参数

1．振动传感器 
灵 敏 度：30mV/mm/s 
加 速 度：8g 
测量范围：2mm 
频率响应：10~300Hz 
2．温度传感器：PT100 
测量范围：0～400℃ 
3．环境温度：-10～100℃ 
4．测量方法：垂直、水平、轴向 
5．固定螺孔：在Φ85的圆周上均匀分布用4个M8螺钉固定 
6．外形尺寸：Φ70mm×180mm 
7．插入深度：83mm

TD-2-50TD-2型热膨胀传感器TD-2-35 Thermal expansion transmitter



It is mainly used to measure the expansion displacement of steam turbine cylinder, and it can complete remote indication, alarm, constant current output and other functions of thermal expansion displacement with XCW-R thermal expansion monitor. The field of vision of local indication is large, and the remote indication is digital display, which is clear and intuitive. The medium frequency differential transformer displacement sensor is used as the sensing element. It is a highly reliable LVDT displacement sensor with strong resistance, good linearity, simple structure, and is not easy to be damaged. It can be used continuously.



Technical indicators:



1. Range: 0 ～ 50mm (the range is determined by the user)

2. Accuracy: ± 1% (full scale)

3. Ambient temperature: - 20 ℃~+100 ℃

4. Relative humidity: ≤ 80%



Sensor structure diagram:





model



Linear range



Sending head extended

Length (L) mm



TD-2-25



twenty-five



ninety



TD-2-35



thirty-five



ninety-five



TD-2-50



fifty



one hundred and seven





Ordering Guide:



Model selection code: TD-2 - A □□

Model Selection Description:

Range A □□:

01 —— 0 ～ 25mm ；

02 —— 0 ～ 35 mm ；

03 —— 0 ～ 50 mm ；



If you have special requirements, please consult with our company.



TD-2-35 Thermal expansion transmitter



Vibration, vibration intensity, shaft vibration, axial displacement, intelligent speed, thermal expansion, differential expansion, hydraulic servo motor, oil level of oil tank, turbine monitor, monitor and protector;



Eddy current, vibration speed, Hall speed, magnetic resistance, thermal expansion, hydraulic motor, oil tank level sensor;



Axial displacement, vibration, integrated vibration, speed, thermal expansion, hydraulic servo motor, oil level transmitter of oil tank.









TD-2 Thermal Expansion Travel Transmitter

TD-2 type thermal expansion travel transmitter is equipped with various TD-2 type linear differential transformer sensors. The built-in excitation source and differential measurement circuit convert the thermal expansion on both sides of the casing into 4~20mA current output. The difference between the two represents the deformation of the casing. This deformation will cause huge stress between the casing and the foundation, resulting in misalignment. If the casing sliding pin system is jammed, serious consequences will be caused.



Technical indicators:



1. External power supply: 24V DC

2. Input signal: receive the signal of a LVDT linear differential transformer; Input impedance:>90K Ω

3. Range: 0 ～ 50 mm

4. Accuracy: ± 1% of full scale

5. Current output: 4 ～ 20 mA active; Output load: ≤ 500 Ω

6. Temperature range: - 25 ℃~+65 ℃ during operation; - 40 ℃~+85 ℃ during storage

7. Relative humidity: 90%, non solidification

8. Physical index: overall dimension 80 × sixty × 50mm ; Mounting screw hole size 50 × 50mm



Order guide



Thermal expansion travel transmitter must be equipped with TD-2 thermal expansion sensor forming system



Model selection code: TD-2 - A □

Model Selection Description:

Range A □: 1 -- 0 ～ 25 mm; 2＊——0～35 mm； 3——0～50 mmBT-50膨胀传感器

　　概述
　　BT-50**膨胀传感器是为汽轮机行业测量汽轮机组**膨胀位移所设计的传感器，它采用中频位移传感器（LVDT）作为传感元件，LVDT有一个探杆与机器相连。当机壳膨胀时，探杆在LVDT内移动，引用LVDT信号发生变化。信号经过解调后输出到监测器上，用于显示和报警。

　　BT-50**膨胀传感器由15-24VDC供电，输出直流电压信号，具有远传线性好，抗干扰性能力强，不易损坏，可靠性好，能连续使用的特点。
　　
　　用途
　　适用于汽轮机汽缸膨胀测量及保护。

　　技术参数
　　线性量程：0~50mm.
　　非线性度：不-20大于0.5%FS.
　　工作温度：-20℃~75℃
　　供电电源：15VDC~24VDC
　　输出信号：±5.8~±10V.
　　环境湿度：不大于95%（非冷凝）。
　　环境振动：不大于2.3g.
　　工作方式：连续
　　执行标准：参照JJG　644-2003　

BT-50膨胀传感器

TD-2 系列膨胀传感器是为汽轮机行业测量汽轮机组膨胀

位移所设计的传感器，它有就地和远传两种指示。就地指示视野大，它

采用中频位移传感器作为传感元件；远传指示线性好，抗干扰性强，结

构简单，不易损坏，可靠性好，能连续使用，输出为恒流。已被国

内大中型汽轮机制造厂选用，其它精密测量行程的位移场合也可采用。

产品出厂时可选配变送器或二次数字仪表，订货时说明。

运用:

适用于汽轮机汽缸膨胀测量及保护。

参数指标

▼ 线性量程：0～25mm；0～35mm；0～50mm；0～80mm 四档可选。

▼ 线性度： 不大于0.5% F·S。

▼ TD-2 系列应选用本厂生产的变送器，方可保证传感器精度。

▼ 变送器工作温度：-5゜C～＋45゜C。

▼ 传感器工作温度：≤100゜C。

▼ 环境湿度：≤95％ 。

▼ 环境振动：≤2.3g。

▼ 工作方式：连续。

订货指南

订货代号：TD-2-A□□-B□□

传感器行程选择：A□□

0 1：0～25mm *0 2：0～35mm

0 3：0～50mm 0 4：0～80mm

配套变送器选择：B□□

＊0 1:不配变送器

0 2：配变送器(注明订货代号，参见XCBSQ 系列订货指南)

综合举例：订货代号为“TD-2-03-01”的产品是指行程为0～50mm、不配置相应变送器的TD-2 系列膨胀传感器。BT-50 expansion sensor



summary

BT-50 * * expansion sensor is a sensor designed for the steam turbine industry to measure the expansion displacement of steam turbine units. It uses an intermediate frequency displacement sensor (LVDT) as the sensing element. The LVDT has a probe rod connected to the machine. When the casing expands, the feeler rod moves in the LVDT and the reference LVDT signal changes. After demodulation, the signal is output to the monitor for display and alarm.



The BT-50 * * expansion sensor is powered by 15-24VDC and outputs DC voltage signal. It has the characteristics of good remote transmission linearity, strong anti-interference ability, good reliability, and continuous use.



purpose

It is applicable to expansion measurement and protection of steam turbine cylinder.



technical parameter

Linear range: 0~50mm

Non linearity: no - 20 greater than 0.5% FS

Working temperature: - 20 ℃~75 ℃

Power supply: 15VDC~24VDC

Output signal: ± 5.8~± 10V

Ambient humidity: no more than 95% (non condensing).

Environmental vibration: no more than 2.3g

Working mode: continuous

Executive standard: refer to JJG 644-2003



BT-50 expansion sensor



TD-2 series expansion sensors are used to measure the expansion of steam turbine units for the steam turbine industry



The sensor designed for displacement has local and remote indication. The local indication has a large field of vision



The intermediate frequency displacement sensor is used as the sensing element; Good linearity of remote indication, strong anti-interference



Simple structure, not easy to damage, good reliability, can be used continuously, and the output is constant current. Already a victim



It is selected by large and medium-sized steam turbine manufacturers, and it can also be used in other displacement occasions for precise stroke measurement.



Transmitter or secondary digital instrument can be selected when the product leaves the factory, which shall be explained when ordering.



application:



It is applicable to expansion measurement and protection of steam turbine cylinder.



Parameter index



▼ Linear range: 0 ～ 25mm; 0～35mm； 0～50mm； 0~80mm four gears are optional.



▼ Linearity: no more than 0.5% F · S.



▼ TD-2 series should use the transmitter produced by our factory to ensure the accuracy of the sensor.



▼ Working temperature of transmitter: - 5 ° C ～ ＋ 45 ° C.



▼ Sensor working temperature: ≤ 100 ℃.



▼ Ambient humidity: ≤ 95%.



▼ Environmental vibration: ≤ 2.3g.



▼ Working mode: continuous.



Order guide



Ordering code: TD-2-A □□□ - B □□



Sensor travel selection: A □□



0 1：0～25mm *0 2：0～35mm



0 3：0～50mm 0 4：0～80mm



Matching transmitter selection: B □□



＊ 0 1: No transmitter



0 2: equipped with transmitter (indicate ordering code, see XCBSQ series ordering guide)



Comprehensive example: products with ordering code of "TD-2-03-01" refer to TD-2 series expansion sensors with a stroke of 0~50mm and without corresponding transmitters.

ABB提供工业机器人、工厂自动化和过程自动化、运动控制等域的创新产品和数字化解决方案，并融合物联网、大数据、云计算、人工智能等先进技术，帮助工业用户提高产品质量、生产效率和运营效率，同时降低能耗和减少排放，加速向自动化、智能化、数字化转型升级，全面提升自身的竞争优势。其中Tmax XT塑壳断路器采用双重绝缘结构，具有超强的抗机械震动和抗电磁效应；AF接触器拥有宽电压、低功耗，分合式开关等优势，可在电压不稳定电路中稳定、持续运行，能帮助中微公司减少80%的消耗ABB自动化喷涂机器人系统中，ABB Ability™互联雾化器能够将上漆率提高10%左右，降低能耗25%，并实现更好的雾化效果和提升喷涂质量。不仅如此，100多台ABB高效电机还配套在小鹏汽车涂装生产线的风机设备上，帮助提升整体设备运行效率，降低总运营成本。ABB Ability™ Genix将工业分析技术和人工智能的强大力量结合在一起，跨职能域整合了25个工程、运营和信息技术系统，消除了运营、业务和工程系统的隔阂，通过先进的分析方法收集和关联数据，然后将其转换为有意义的信息，从而提高业务决策的质量来改善生产力。ABB将智能传感器部署在关键生产线中，对车间50多台重点电机进行持续监测，帮助客户实现电机工作状态的远程监测，在电机故障之前发现问题并解决问题，降低非计划性停机的概率，提升产线运行效率，保障产能。

早在2016年，ABB就推出了应用于低压电机的智能传感器，它可以降低近70%电机故障停工时间，延长30%使用期限，同时减少近10%的能耗，通过状态监测解决方案将数以万计的低压电机转变成智能、互联的机器ABB贝加莱为新马压片机提供了自动化解决方案，采用贝加莱的Panel PC 3100,它可以同时运行Windows和实时任务，其支持OPC UA的数据连接能力。另外，贝加莱的应用软件，包括mappAudit提供制药行业所需的审计追踪功能，满足FDA 21CFR Part 11电子数据认证、mappPackML提供制药工厂MES系统之间的生产数据连接，如OEE、品质、生产状态参数。mappUser、mappRecipe提供用户及配方管理，这使得机器具有强大的数据功能，融入药厂的数字化管理。ABB Ability™ MOM的数字化集控平台为客户提供生产运营数据的可视化，赋能数据决策。该系统将分散在厂区各地的控制系统、安全系统、融合通讯系统、人员定位系统、视频监控系统等集成到分离于生产作业区之外的集中控制区（中心控制室）进行集中监控和管理，帮助客户大幅提高运营和管理效率，提升安全生产水平。聚焦ABB Ability™数字化技术及应用，全面展示智慧能源、智能制造、智能交通与智慧城市四大域的创新成果，其中包括多种先的智能制造解决方案，例如GoFa™ CRB 15000焊接工作站、IRB 920T 高速物料分拣工作站在内的工业机器人解决方案，丰富的高效电机和变频器产品，以及面向过程工业、能源工业的电气和自动化解决方案。The DeltaV SQ controllers provides communication and
control functions and integrate field devices and the other
nodes on the control network. The SX and SQ controllers
provide a choice to match the controller capacity to the
requirements of the process. They also provide new ease
of use features that eliminate mounting screws and accelerate
cabinet assembly.
Control strategies and system configurations created on
earlier DeltaV systems can be used with this controller.
The SQ controller provides all the features and functions
of the M-series controllers including support for CHARM
based Electronic Marshalling.
The control languages executed in the controllers are
described in the control software product data sheet.Scalable controllers. The SQ controller complements the
SX controller by providing a smaller controller platform at
a reduced price for those small to moderate applications:
„ Speed. The SQ controller supports all the features you’ve
come to expect from the DeltaV system: self-addressing,
automatic I/O detection. All these features are designed
to make your projects execute faster — just plug and play!
„ Redundant Architecture. The SQ controller supports
1:1 redundancy for increased availability. Redundant SQ
controllers can be upgraded to SX controllers online — robust!
„ Late Changes. You can easily upgrade an SQ controller
to an SX to handle project scope changes late in the
project. Simply replace the SQ with the SX and all existing
configuration, documentation and hardware design remain
the same — forgivingControl modules are automatically scheduled by the controller,
based on their assigned scan rates. This allows each control
function to be optimized based on the process dynamics.
Modules scan times can be set as fast as 100 ms, and as slow
as 60 seconds. The number of control modules that can be
assigned to a controller depends on the complexity and scan
rate of each module, and the available CPU and memory.
The SQ controller should be used for small to medium
applications with a maximum of 750 individual I/O signals.
The SQ controller is designed for harsh environments and
is rated for G3 corrosive environments, with an operating
temperature range from -40 to 70°C. It is ideally suited for
remote installation, close to the process equipment. For more
traditional installations with central marshalling cabinets,
CHARM I/O Cards can be mounted in standard I/O cabinets
providing Electronic Marshalling. CHARM I/O Cards can also
be used for highly distributed I/O applications.除了传统的I/O卡，本地总线还支持

现场总线技术，

Profibus DP、DeviceNet和AS-i协议。I/O子系统

还支持串行接口卡和以太网I/O

界面这些不同的I/O产品提供了广泛的

接口，以满足控制应用程序的需要。

SQ控制器还支持CHARM和WirelessHART

I/O卡。CHARM I/O卡（CIOC）通过

控制器的冗余以太网端口，以提供

高度分布式和灵活的I/O解决方案，称为Electronic

编组。多16个CIOC可以与一个

控制器，每个控制器提供多达96个可单独配置的

信号类型。

SQ控制器的容量限制可能因

在特定应用中，CHARM I/O信号的数量

以及控制性能要求。增强

内存处理和硬件警报，涵盖容量和

通过索引将内存添加到诊断信息中

SQ控制器。

无线HART I/O卡（WIOC）提供冗余

多100个无线HART设备的通信，提供

无线数据的高可用性和可靠性。多16个

无线HART I/O卡可以与一个控制器通信，

每个提供多达100个信号。The first firmware version for the PTQ-PDPMV1 that supported HSBY was version 1.15.  That version and successive versions up until version 1.25 could support only one (1) PTQ-PDPMV1 module per HSBY CPU chassis.  Starting with version 1.25 and later, you can have up to four (4) PTQ-PDPMV1 modules per HSBY chassis.