产品描述GE RST模拟I/O板DS200TCQAG1包含六个34针连接器、两个40针连接器和六个跳线。该板还具有6个LED。LED排列成两行，每行有三个LED。当板安装在驱动器中时，它安装在其他板之间，从板柜的玻璃正面可以看到GE RST模拟I/O板DS200TCQAG1的侧面。LED的排列使操作员可以在驱动器运行时看到它们。LED指示板的6个功能的运行状况，并且在活动发生时闪烁。要了解每个LED的用途，您可以阅读出厂时随原始电路板提供的安装说明中提供的有关LED的信息。驱动器操作员可以一目了然地确定电路板的健康状况和正在进行的处理。

JA、JB、JD、JE、JG和3PL是分配给34针连接器的ID。ID打印在每个连接器旁边的电路板表面上。当您计划更换电路板时，请在驱动器中检查有缺陷的电路板，并在带状电缆上标记它所连接的连接器的ID。这将加快新电路板的安装速度，因为您将立即知道34针带状电缆的连接位置。握住带状电缆连接到电路板的连接器以将其分离。
有关DS215TCQAG1BZZ01A的常见问题

DS215TCQAG1BZZ01A读取哪些类型的输入？

DS215TCQAG1BZZ01A读取LVDT输入。VDC1和VDC2的个冗余传感器输入也通过专用带状电缆传输到<R>控制处理器中的DS215TCQAG1BZZ01A。

DS215TCQAG1BZZ01A软件中包含哪些调节器？

数字控制调节器是Mark V中每个控制处理器DS215TCQAG1BZZ01A上I/O配置软件的一部分。

当Mark V发生故障自杀时，DS215TCQAG1BZZ01A会发生什么？

当Mark V上启用电流故障自杀时，DS215TCQAG1BZZ01A上的继电器将断电，DS215TCPQAG1BZZ11A上的一对常闭触点将使输出端子短路。

在哪里可以找到DS215TCQAG1BZZ01A的手册？

我们可以为您提供DS215TCQAG1BZZ01A的手册。与DS215TCQAG1BZZ01A一起使用的手册是Speedtronic Mark V涡轮机控制应用手册，手册GEH-6195，本手册涵盖Mark V Speedtroni控制器的应用信息，The GE RST Analog I/O Board DS200TCQAG1 contains six 34-pin connectors, two 40-pin connectors, and six jumpers. The board also has 6 LEDs. The LEDs are arranged in two rows with three LEDs in each row. When the board is installed in the drive, it is installed between other boards and the side of the GE RST Analog I/O Board DS200TCQAG1 is visible from the glass front of the board cabinet.

The LEDs are arranged so the operator can see them while the drive is in operation. The LEDs indicate the health of 6 functions of the board and they flash when activity takes place. To understand the purpose of each LED, you can read the information about the LEDs provided in the installation instructions that are supplied with the original board from the factory. The drive operator can at a glance ascertain the health of the board and the processing taking place.