产品描述

GE驱动器控制板DS200SDCCG1ACA是驱动器的主控制器。GE驱动控制板DS200SDCCG1ACA配备有3个微处理器和RAM，可由多个微处理器同时访问。对于可选功能，您可以向GE驱动器控制板DS200SDCCG1ACA添加辅助板。可选卡连接到板上，连接器可用于将电缆从可选卡连接至板。



这些卡能够连接到局域网（LAN），并处理多桥信号，或处理从板发送或由板接收的信号。如果安装了可选卡并更换了GE驱动器控制板DS200SDCCG1ACA，则必须执行一些其他步骤来执行更换。首先，从驱动器中取出有缺陷的电路板后，将电路板放在保护袋上，然后将保护袋压平，放在水平表面上。接下来，从板上卸下可选卡并断开所有电缆。在安装替换板之前，将板放在保护袋上，安装可选卡并连接电缆。然后，继续安装更换板。



GE驱动控制板DS200SDCCG1ACA具有十个LED灯，它们一起工作以提供板的状态。LED位于一行中，当电路板无故障运行时，两个LED同时按顺序闪烁，以指示电路板运行正常。



有关DS200SDCCG1ACA的常见问题解答

DS200SDCCG1ACA有多少个卡连接？

DS200SDCCG1ACA有8个卡连接器。DS200SDCCG1ACA通过这些连接器与控制器的其他板和外部信号连接。DS200SDCCG1ACA的连接器包括：1PL、2PL、3PL、6PL、7PL、8PL、9PL和11PL。要查看DS200SDCCG1ACA上连接器的位置，请参阅DS200SDCGG1ACA手册中的图3-手册GEI-100029。

DS200SDCCG1ACA上可以安装哪些板？

Product Description



The GE drive control board DS200SDCCG1ACA is the main controller of the drive. The GE drive control board DS200SDCCG1ACA is equipped with three microprocessors and RAM, which can be accessed simultaneously by multiple microprocessors. For optional features, you can add an auxiliary board to the GE drive control board DS200SDCCG1ACA. The optional card is connected to the board, and the connector can be used to connect cables from the optional card to the board.





These cards are capable of connecting to a local area network (LAN) and processing multi bridge signals, or processing signals sent or received from the board. If you installed an optional card and replaced the GE drive control board DS200SDCCG1ACA, you must perform some other steps to perform the replacement. First, after removing the defective circuit board from the driver, place the circuit board on a protective bag, then press the protective bag flat and place it on a horizontal surface. Next, remove the optional card from the board and disconnect all cables. Before installing the replacement board, place the board on a protective bag, install the optional card, and connect the cables. Then, continue installing the replacement board.





The GE drive control board DS200SDCCG1ACA has ten LED lights that work together to provide the status of the board. The LEDs are located in one row, and when the circuit board is operating without faults, both LEDs flash simultaneously in sequence to indicate that the circuit board is operating normally.





Frequently Asked Questions about DS200SDCCG1ACA



How many card connections does the DS200SDCCG1ACA have?



The DS200SDCCG1ACA has 8 card connectors. The DS200SDCCG1ACA is connected to other boards of the controller and external signals through these connectors. The connectors for the DS200SDCCG1ACA include: 1PL, 2PL, 3PL, 6PL, 7PL, 8PL, 9PL, and 11PL. To view the location of the connectors on the DS200SDCCG1ACA, refer to Figure 3-Manual GEI-100029 in the DS200SDCGG1ACA manual.



What boards can be installed on the DS200SDCCG1ACA?